4" RIV Lever Valve FNPT X 4-Bolt Flange

RIV 6" lever valve with 4-bolt flange x FNPT (female national pipe thread) fittings are made from solid brass. It's full port design allows for easy flow by opening completely.

The Moro USA 4” type C provides leak-tight connections to other cam-lock fittings. The male hose shank will attach directly to the hose. The female coupler will attach to a male adapter. These aluminum adapters are lightweight and offer strength as well as resistance to corrosion and abrasion.

The Moro USA 4” type B provides leak-tight connections to other cam-lock fittings. The male threaded side will attach to a female threading. The female coupler will attach to a male adapter. These aluminum adapters are lightweight and offer strength as well as resistance to corrosion and abrasion.

Features - Bronze construction; double gate

Advantages - Improved sealing ability and a double wedge gate design, so that the gate can fit perfectly in the tapered seat

Moro USA Rear Door Gasket is made with 60 durometer commercial grade nitrile gasketing material. This NBR (nitrile rubber) is designed for use in a variety of gasketing applications due to it's excellent resistance to oil. This Rear Door Gasket has a 1.85" wide fluted design and fits 1.60" to 1.85" wide channels. Gasket is 22' in length.

Features - Bronze construction; double gate

Advantages - Improved sealing ability and a double wedge gate design, so that the gate can fit perfectly in the tapered seat

4" hose barb x male cam fitting.

4" MNPT x male cam fitting.

The Moro USA 6” type A provides leak-tight connections to other cam-lock fittings. The female threaded side will attach to a male threading. The male camlock quick connect adapter will attach to a female camlock coupler. These aluminum adapters are lightweight and offer strength as well as resistance to corrosion and abrasion.

4" Female Threaded to Female Quick Couple Camlock

Designed to limit the pressure occurring within your tanks, the 1-1/2” RIV MNPT Pressure Relief Valve works as a vital safeguard against the dangerous consequences of exceeding the pressure your system can handle. A type of safety valve, this 1-1/2-inch pressure relief valve is the most important safety feature for your vacuum truck – releasing extra pressure to avoid the worst-case-scenario of a tank exploding and hurting or killing someone.

Pressure relief valves are generally positioned on your vacuum pump truck’s primary or secondary tank but can be retrofitted to go between the primary tank and the secondary scrubber. An adjustable pressure relief valve is often paired with a vacuum relief valve, and both can be monitored with a dual vacuum/pressure gauge as seen in Moro’s Pressure/Vacuum Relief Tree. A vacuum relief valve functions similarly to a pressure relief valve but is more concerned with keeping the vacuum pump safe and preventing tank implosion, rather than the larger issue of keeping personnel safe.

RIV relief valves are easily adjustable for routine maintenance and on-the-job pressure modifications.* Changing the pressure is as simple as loosening the lock nut, turning the spring-tightener clockwise to compress the spring (increasing the pressure) and counter-clockwise to release the spring (decreasing pressure), then tightening the lock nut to set. Adjustable safety relief valves are also designed with tamper-proof caps. These caps come with pre-drilled holes in tiny “tongues” with a ring inserted to prevent accidental pressure changes or to deter arbitrary tinkering of safety equipment.

*Pressure will need to be adjusted in the field for your unique truck/tank specifications and application. We recommend 5 PSI maximum tank pressure.

The RIV 1-1/2” Pressure Relief Valve also features a convenient hose shank connection to divert air and overflow liquids away from the vacuum pump to an appropriate vessel. This keeps your pump cleaner, reduces maintenance for you and your staff, and extends the overall life of the pump.

Constructed with a solid brass body and zinc-plated steel springs and fasteners, RIV pressure relief valves are manufactured using anti-corrosive materials to protect your valve from moisture. RIV valves also use gaskets constructed from FPM (Viton), a high-grade, versatile synthetic rubber known for its ability to perform well in high-pressure and high-temperature situations as well as its excellent resistance to weathering, oxidation, and chemicals such as oils and fatty acids. When safety is an issue, high-quality materials can make all the difference. Breathe a sigh of relief knowing you can depend on your RIV safety relief valve to keep you and your equipment safe for years to come.

How it Works

Under normal circumstances, your system – the pipes, fittings, tanks, pumps, and other equipment – operates at or around a certain PSI. At this point, the pressure relief valve is not engaged and remains closed. Inside the relief valve there is a large, adjustable spring that is set to a specific pressure higher than that of the fluids in the system. When the pressure in the system is greater than that of the spring, it will force a small poppet inside to lift, compressing the spring, and opening the valve. Excess pressure is discharged, and PSI is reduced. Once it has returned to the desired operating pressure, the spring’s force will again be greater than that of the process fluid and will release, pushing the poppet back down into its seat, closing the valve, and returning the system to the appropriate pressure.

Designed to limit the pressure occurring within your tanks, the 1 ¼” RIV MNPT Pressure Relief Valve works as a vital safeguard against the dangerous consequences of exceeding the pressure your system can handle. A type of safety valve, this 1 ¼-inch pressure relief valve is the most important safety feature for your vacuum truck – releasing extra pressure to avoid the worst-case-scenario of a tank exploding and hurting or killing someone.

Pressure relief valves are generally positioned on your vacuum pump truck’s primary or secondary tank but can be retrofitted to go between the primary tank and the secondary scrubber. An adjustable pressure relief valve is often paired with a vacuum relief valve, and both can be monitored with a dual vacuum/pressure gauge as seen in Moro’s Pressure/Vacuum Relief Tree. A vacuum relief valve functions similarly to a pressure relief valve but is more concerned with keeping the vacuum pump safe and preventing tank implosion, rather than the larger issue of keeping personnel safe.

RIV relief valves are easily adjustable for routine maintenance and on-the-job pressure modifications.* Changing the pressure is as simple as loosening the lock nut, turning the spring-tightener clockwise to compress the spring (increasing the pressure) and counter-clockwise to release the spring (decreasing pressure), then tightening the lock nut to set. Adjustable safety relief valves are also designed with tamper-proof caps. These caps come with pre-drilled holes in tiny “tongues” with a ring inserted to prevent accidental pressure changes or to deter arbitrary tinkering of safety equipment.

*Pressure will need to be adjusted in the field for your unique truck/tank specifications and application. We recommend 5 PSI maximum tank pressure.

The RIV 1 ¼” Pressure Relief Valve also features a convenient hose shank connection to divert air and overflow liquids away from the vacuum pump to an appropriate vessel. This keeps your pump cleaner, reduces maintenance for you and your staff, and extends the overall life of the pump.

Constructed with a solid brass body and zinc-plated steel springs and fasteners, RIV pressure relief valves are manufactured using anti-corrosive materials to protect your valve from moisture. RIV valves also use gaskets constructed from FPM (Viton), a high-grade, versatile synthetic rubber known for its ability to perform well in high-pressure and high-temperature situations as well as its excellent resistance to weathering, oxidation, and chemicals such as oils and fatty acids. When safety is an issue, high-quality materials can make all the difference. Breathe a sigh of relief knowing you can depend on your RIV safety relief valve to keep you and your equipment safe for years to come.

How it Works

Under normal circumstances, your system – the pipes, fittings, tanks, pumps, and other equipment – operates at or around a certain PSI. At this point, the pressure relief valve is not engaged and remains closed. Inside the relief valve there is a large, adjustable spring that is set to a specific pressure higher than that of the fluids in the system. When the pressure in the system is greater than that of the spring, it will force a small poppet inside to lift, compressing the spring, and opening the valve. Excess pressure is discharged, and PSI is reduced. Once it has returned to the desired operating pressure, the spring’s force will again be greater than that of the process fluid and will release, pushing the poppet back down into its seat, closing the valve, and returning the system to the appropriate pressure.