The STORM series vacuum pumps embody the most elevated standards in technology of liquid cooled suction pumps. They are designed to be used in industrial applications that have varying capability requirements. Moro offers five separate STORM Series pumps to meet these differing application needs. These pumps are crafted with a high-resistant cast iron body and include a cooling circuit to maximize heat dissipation.

The STORM Series is designed with air intake and discharge ports that have been fine-tuned to reduce both noise and heat production. The cooling circuit greatly increases heat dissipation and improves the time of pump usage under deep vacuum. These liquid cooled vacuum pumps come standard with a water recirculating pump and are equipped with a special inspection port in the pump body allowing a visual check of the equipment’s wear.

The vanes in this series are made of a high-heat-resistant Kevlar material. The non-return and the four-way valves are integrated into the pump.

Moro M9 liquid cooled vacuum pump produces a flow of 547 CFM.

The TURBO Series (fan cooled) vacuum pumps utilize dual-fan technology to drastically increase heat dissipation. These pumps are designed to be used in industrial applications that have varying capability requirements. Moro offers four separate TURBO Series pumps to meet these differing application needs.

The TURBO Series vacuum pumps are crafted with a cast iron body to guarantee maximum reliability. Cast Iron is the most efficient material for releasing heat from the pump. The air intake and discharge are designed to reduce noise and heat production. The increase in the ability to handle heat has been improved upon by the introduction of two cooling fans. These fans assist in the cooling of the pump, allowing for longer pump time usage. The TURBO Series pumps are equipped with a special inspection port in the pump body, allowing a visual check of the equipment’s wear.

The pumps in this series are built with high quality Kevlar vanes and high-heat-resistant Viton seals which results in better performance at high temperatures. The pump comes with the non-return and four-way valves integrated into the pump. The hose connection elbows are flanged and can be moved in any desired direction in accordance with the requirements of the vacuum pump usage.

Moro AC5T Vacuum Pump produces a flow of 544 CFM.

The purpose of this Swing Check Valve is to act as an automatic shut-off preventing back flow or drainage. These valves work great on the discharge side of pumps, preventing unwanted drainage, and unwanted back flow.

The Moro USA DC 10– Cast Iron Washdown Pump with SS (Stainless Steel) Impeller is a premium addition to your septic pumper or portable restroom truck. Designed to allow you to quickly clean and fill portable restrooms and sinks, this heavy-duty 12 Volt 1HP DC washdown motor is built for power and lasting performance.

These straight centrifugal pumps are well-suited for use in heavily damp and wet conditions. Mechanical shaft seals and Viton O-rings restrict water and keep your pump sealed and running smoothly. The 12-volt DC motor has stud connections for electrical hookup. Moro washdown pumps achieve a maximum delivery rate of 20 gallons per minute (GPM) and 42 PSI, which can be adjusted using your preferred hose nozzle or spray gun. These rugged washdown duty motors also include oversized brushes to extend the life of the motor.

The DC 12-volt washdown pump’s robust housing is built from cast iron with epoxy coating to combat corrosion and rust. All Moro DC centrifugal washdown pumps are equipped with high-efficiency stainless steel impellers designed for precision and resilience. The closed design ensures the impeller won’t deform, bend, or break even in the toughest conditions.

A carbon ceramic mechanical seal containing Viton O-rings forms a powerful barrier protecting the motor from the fluids in pump chamber. Viton is a synthetic rubber with high performance and durability. With excellent temperature handling, it keeps sealing when exposed to weather, oxidation, UV, fungus, and mold. Viton boasts chemical resistance to a range of fluids including water (up to 210 C/410 F), oils, and acids. With these winning characteristics, the carbon ceramic Viton mechanical seal offers superior endurance in the harsh extremes required of an industrial seal.

Built to make your job easier, the Moro DC-10 12-volt washdown pumps have a one-inch threaded discharge located at the top of the unit for easy access that can be rotated in 90-degree increments to suit your needs. Each pump motor comes ready to be mounted to your septic/restroom truck or other support. Approach each job with confidence knowing your washdown pump is created from top-of-the-line materials designed and used by experts in the field.

Products Also Required but Not Included:

In-Line Circuit Breaker

12 V Solenoid

If installing new, consider purchasing our Moro USA - DC Cast Iron Washdown Pump with SS Impeller Kit.

Pump Dimensions
16.50" L x 8.75" W x 8.40" H
Weight: 50 lbs.

Industrial applications requiring a superior performance at high temperatures can rely on the TURBO Series of fan cooled vacuum pumps. The PM90T is a dual fan air cooled vacuum pump featuring forced convection air cooling that meets and exceeds industry standards in the technology of vacuum suction.

The PM90T delivers a best-in-class dual fan-cooled vacuum pump that delivers maximum reliability and performance, passing a 20-point inspection. The Moro Vacuum Pumps are designed specifically for use on vacuum trucks for liquid waste application and deserve their reputation for simplicity, quietness, and reliability.

The PM90T in the Turbo Series of dual fanned vacuum pumps operates at a low rotating speed and has a long pump life. The 90T offers both clockwise and counterclockwise rotation. These vacuum pumps have an efficient built in cooling system that is independent of the truck’s cooling system and designed to be used in industrial applications that have varying capability requirements.

Pump cooling efficiency is achieved with the Turbo Series, and can be measured by lower operating cost, a longer pump time, and a longer pump life. The pump’s body is constructed of cast-iron, the most efficient material for releasing heat from the pump. The increase of heat exchange is granted by the introduction of two cooling fans for a reduced cooling time. Constructed with high quality Kevlar vanes and high heat resistant Viton seals for a better resistance to high temperatures, MORO has 65 years of history delivering best in class engineered pumps and technologies.

Providing continuous pumping ability, this pump is a workhorse with integrated features. Leading with a non-return and 4-way valves integrated in the pump, and a side-mounted stainless steel oil tank, applicable both on the RIGHT and on the LEFT side. (Remote oil tank option also available.) New forced continuous closed lubrication with a piston pump, the PM90T Turbo series vacuum pump can easily change rotation (CR or CCR) by exchanging the lubrication pump and means there is no reason to open the vacuum pump and replace parts, only the lubrication pump itself.

The cast iron body efficiently release heat from the pump and the air intake and discharge are designed to reduce heat production and noise level. The TURBO Series pumps are equipped with a special inspection port in the pump body for a visual check of the equipment’s wear at any time.

This dual fan vacuum pump moves 430 CFM, operates at 29 PSI and has a 3” hose. Weighing 470 pounds, this pump features built-in lifting hooks for ease of installation and safety and comes complete with drive shaft and port connections.

Available with Remote Oil Reservoir.

Pump cooling efficiency is achieved with the introduction of the new PM150T in the Moro Turbo Series. Measured by lower operating cost, a longer pump time, and a longer pump life, this vacuum pump is for industrial applications requiring a superior performance at high temperatures.

The Moro Vacuum Pumps are designed specifically for use on vacuum trucks for liquid waste application and deserve their reputation for simplicity, quietness, and reliability. The cast iron body efficiently release heat from the pump and the air intake and discharge are designed to reduce heat production and noise level.

The dual fan-cooled vacuum pumps in the Turbo Series operate at a low rotating speed and have a long pump life. MORO has 65 years of history delivering best in class engineered pumps and technologies. This air-cooled vacuum pump with forced convection air cooling provides maximum reliability in performance and pump protection, passing a 20-point inspection.

Providing continuous pumping ability, this pump is a workhorse with integrated features. Leading with a non-return and 4-way valves integrated in the pump, and a side-mounted stainless steel oil tank, applicable both on the RIGHT and on the LEFT side. (Remote oil tank option also available.) New forced continuous closed lubrication with a piston pump, the PM150T Turbo series vacuum pump can easily change rotation (CR or CCR) by exchanging the lubrication pump and means there is no reason to open the vacuum pump and replace parts, only the lubrication pump itself. Constructed with high quality Kevlar vanes and high heat resistant Viton seals that provide a better resistance to high temperatures and a longer life than traditional oil seals.

The TURBO Series pumps are equipped with a special inspection port in the pump body for a visual check of the equipment’s wear at any time. This dual fan vacuum pump moves 546 CFM and 29 PSI and has a 4” flange. Weighing 529 pounds, this pump features built-in lifting hooks for ease of installation and safety and comes complete with drive shaft and port connections.

Available with Remote Oil Reservoir