The Moro USA DC 10– Stainless Steel Washdown Pump Kit is a premium addition to your septic pumper or portable restroom truck. Designed to allow you to quickly clean and fill portable restrooms and sinks, this heavy-duty 12 Volt 1HP DC-10 washdown motor is built for power and lasting performance.

This Moro USA Washdown Pump Kit includes the unparalleled DC Stainless Steel Washdown Pump as well as a 12V Solenoid (required for operation) and a Pressure Switch for remote pressure monitoring.

These straight centrifugal pumps are well-suited for use in heavily damp and wet conditions. Mechanical shaft seals and Viton O-rings restrict water and keep your pump sealed and running smoothly. The 12-volt DC motor has stud connections for electrical hookup. Moro washdown pumps achieve a maximum delivery rate of 20 gallons per minute (GPM) and 42 PSI, which can be adjusted using your preferred hose nozzle or spray gun. These rugged washdown duty motors also include oversized brushes to extend the life of the motor.

The DC10 12-volt washdown pump’s robust housing is built from stainless steel with epoxy coating to combat corrosion and rust. All Moro DC centrifugal washdown pumps are equipped with high-efficiency stainless steel impellers designed for precision and resilience. The closed design ensures the impeller won’t deform, bend, or break even in the toughest conditions.

A carbon ceramic mechanical seal containing Viton O-rings forms a powerful barrier protecting the motor from the fluids in pump chamber. Viton is a synthetic rubber with high performance and durability. With excellent temperature handling, it keeps sealing when exposed to weather, oxidation, UV, fungus, and mold. Viton boasts chemical resistance to a range of fluids including water (up to 210 C/410 F), oils, and acids. With these winning characteristics, the carbon ceramic Viton mechanical seal offers superior endurance in the harsh extremes required of an industrial seal.

Built to make your job easier, the Moro DC 12-volt washdown pumps have a one-inch threaded discharge located at the top of the unit for easy access that can be rotated in 90-degree increments to suit your needs. Each pump motor comes ready to be mounted to your septic/restroom truck or other support. Approach each job with confidence knowing your washdown pump kit is created from top-of-the-line materials designed and used by experts in the field.

Products Also Required but Not Included:

In-Line Circuit Breaker

12 V Solenoid

Pump Dimensions
16.50" L x 8.75" W x 8.40" H
Weight: 50 lbs.

The Moro USA DC 10– Cast Iron Washdown Pump with SS (Stainless Steel) Impeller Kit is a premium addition to your septic pumper or portable restroom truck. Designed to allow you to quickly clean and fill portable restrooms and sinks, this heavy-duty 12 Volt 1HP DC washdown motor is built for power and lasting performance.

This Moro USA Washdown Pump Kit includes the unparalleled DC Cast Iron Washdown Pump with SS Impeller as well as a 12V Solenoid (required for operation) and a Pressure Switch for remote pressure monitoring.

These straight centrifugal pumps are well-suited for use in heavily damp and wet conditions. Mechanical shaft seals and Viton O-rings restrict water and keep your pump sealed and running smoothly. The 12-volt DC motor has stud connections for electrical hookup. Moro washdown pumps achieve a maximum delivery rate of 20 gallons per minute (GPM) and 42 PSI, which can be adjusted using your preferred hose nozzle or spray gun. These rugged washdown duty motors also include oversized brushes to extend the life of the motor.

The DC10 12-volt washdown pump’s robust housing is built from cast iron with epoxy coating to combat corrosion and rust. All Moro DC centrifugal washdown pumps are equipped with high-efficiency stainless steel impellers designed for precision and resilience. The closed design ensures the impeller won’t deform, bend, or break even in the toughest conditions.

A carbon ceramic mechanical seal containing Viton O-rings forms a powerful barrier protecting the motor from the fluids in pump chamber. Viton is a synthetic rubber with high performance and durability. With excellent temperature handling, it keeps sealing when exposed to weather, oxidation, UV, fungus, and mold. Viton boasts chemical resistance to a range of fluids including water (up to 210 C/410 F), oils, and acids. With these winning characteristics, the carbon ceramic Viton mechanical seal offers superior endurance in the harsh extremes required of an industrial seal.

Built to make your job easier, the Moro DC-10 12-volt washdown pumps have a one-inch threaded discharge located at the top of the unit for easy access that can be rotated in 90-degree increments to suit your needs. Each pump motor comes ready to be mounted to your septic/restroom truck or other support. Approach each job with confidence knowing your washdown pump kit is created from top-of-the-line materials designed and used by experts in the field.

Products Also Required but Not Included:

In-Line Circuit Breaker*

*This unit requires the use of an in-line circuit breaker.

The STORM series vacuum pumps embody the most elevated standards in technology of liquid cooled suction pumps. They are designed to be used in industrial applications that have varying capability requirements. Moro offers five separate STORM Series pumps to meet these differing application needs. These pumps are crafted with a high-resistant cast iron body and include a cooling circuit to maximize heat dissipation.

The STORM Series is designed with air intake and discharge ports that have been fine-tuned to reduce both noise and heat production. The cooling circuit greatly increases heat dissipation and improves the time of pump usage under deep vacuum. These liquid cooled vacuum pumps come standard with a water recirculating pump and are equipped with a special inspection port in the pump body allowing a visual check of the equipment’s wear.

The vanes in this series are made of a high-heat-resistant Kevlar material. The non-return and the four-way valves are integrated into the pump.

Moro PM2000 liquid cooled vacuum pump produces a flow of 833 CFM.

The STORM series vacuum pumps embody the most elevated standards in technology of liquid cooled suction pumps. They are designed to be used in industrial applications that have varying capability requirements. Moro offers five separate STORM Series pumps to meet these differing application needs. These pumps are crafted with a high-resistant cast iron body and include a cooling circuit to maximize heat dissipation.

The STORM Series is designed with air intake and discharge ports that have been fine-tuned to reduce both noise and heat production. The cooling circuit greatly increases heat dissipation and improves the time of pump usage under deep vacuum. These liquid cooled vacuum pumps come standard with a water recirculating pump and are equipped with a special inspection port in the pump body allowing a visual check of the equipment’s wear.

The vanes in this series are made of a high-heat-resistant Kevlar material. The non-return and the four-way valves are integrated into the pump.

Moro PM2000 liquid cooled vacuum pump produces a flow of 1001 CFM.

The STORM series vacuum pumps embody the most elevated standards in technology of liquid cooled suction pumps. They are designed to be used in industrial applications that have varying capability requirements. Moro offers five separate STORM Series pumps to meet these differing application needs. These pumps are crafted with a high-resistant cast iron body and include a cooling circuit to maximize heat dissipation.

The STORM Series is designed with air intake and discharge ports that have been fine-tuned to reduce both noise and heat production. The cooling circuit greatly increases heat dissipation and improves the time of pump usage under deep vacuum. These liquid cooled vacuum pumps come standard with a water recirculating pump and are equipped with a special inspection port in the pump body allowing a visual check of the equipment’s wear.

The vanes in this series are made of a high-heat-resistant Kevlar material. The non-return and the four-way valves are integrated into the pump.

Moro PM200 liquid cooled vacuum pump produces a flow of 678 CFM.

The STORM series vacuum pumps embody the most elevated standards in technology of liquid cooled suction pumps. They are designed to be used in industrial applications that have varying capability requirements. Moro offers five separate STORM Series pumps to meet these differing application needs. These pumps are crafted with a high-resistant cast iron body and include a cooling circuit to maximize heat dissipation.

The STORM Series is designed with air intake and discharge ports that have been fine-tuned to reduce both noise and heat production. The cooling circuit greatly increases heat dissipation and improves the time of pump usage under deep vacuum. These liquid cooled vacuum pumps come standard with a water recirculating pump and are equipped with a special inspection port in the pump body allowing a visual check of the equipment’s wear.

The vanes in this series are made of a high-heat-resistant Kevlar material. The non-return and the four-way valves are integrated into the pump.

Moro M9 liquid cooled vacuum pump produces a flow of 547 CFM.